Advantages for led tube light with full plastic
Many advantages for Greenough led tube light with full plastic
1. Do not need to stick silicone on PCB, method is same with the original aluminum tubes- Simple operation
2. The thermal conductivity is 5 times than the original PC – Heat Dissipation is guaranteed
3. off is not bad, stepped constantly – Less Waste
4. A special plug with a snap-free glue, screw-free - More efficient
5. Meanwhile plug and snap lock aluminum plate - Simple light bar fixed
6. Light weight --1.2M18W bare lamp is 148 g ± 3 g, a reduction of approximately 70 grams than the original aluminum plastic tubes, a reduction of approximately 100 grams than glass tubes
7. The larger beam angle - the full range of light angle is more than 300 degrees, the original aluminum plastic tubes just can reach 180 to 210 degrees
8. High luminous efficiency - homemade chips entire lighting efficiency can reach about 105 LM / W, also means 18W can reach more than 1900LM, if with imported chips or lamp beads can reach 130LM / W
9. Less heat - the back of the temperature is 18 to 20 degrees, positive temperature is 5 to 6 degrees; Drop the current methods by using high-power lamp beads (5730 88pcs.) to reduce basically the heat
10. Width Input Voltage : 85--265V / 50--60HZ input voltage - Adapt to global voltage
11. The high pressure resistant- all plastic construction, the entire light through AC6000V test; absolutely safe
12. High power factor - Power factor is higher than 0.97, exceeding Energy Star requirements
13. No flash - No flicker under 0.5M shooting lamp.
Previous: LED Down light, LED Spot light and LED Panel Light
